Full-line Nails Manufacturer
-1776220408663.webp)
Estimate the weight per piece and per 1,000 pieces (or any quantity) for common fastener types โ bolts, nuts, washers, nails, and screws. Based on theoretical volume ร material density. Essential for purchasing, shipping cost estimation, and inventory management.
Weight per 1000 Pieces Calculator for Fasteners
Estimate the weight of 1000 fastener pieces by type, size and material for purchasing, packaging and shipping.
Calculator
Diameter (d)(mm)
Nominal thread diameter
Length (L)(mm)
Total body length under head
โ๏ธ
Results appear here
Select type, enter dimensions,
click Calculate โ
Material Density Reference
| Material | Density (g/cmยณ) | vs Steel |
|---|---|---|
| Carbon Steel | 7.85 | 100% |
| Stainless Steel 304 | 7.93 | 101% |
| Stainless Steel 316 | 7.98 | 102% |
| Brass (C360) | 8.49 | 108% |
| Copper | 8.96 | 114% |
| Aluminum 6061 | 2.70 | 34% |
| Titanium Grade 5 | 4.43 | 56% |
Notes & Limitations
- Weights are theoretical estimates based on simplified geometric models. Actual weights vary by manufacturer, tolerances, and coating thickness.
- Hex bolt head dimensions are based on ISO 4014 / DIN 931 nominal values. Hex nut dimensions follow ISO 4032.
- For nails: weight includes a flat round head (diameter โ 2.5ร wire diameter). Ring shank, spiral, or headless nails will differ.
- Coatings (zinc plating, HDG, phosphate) typically add 1โ8% to the base steel weight depending on coating thickness.
- For trade / shipping purposes, always verify with the supplier's actual weight data or mill test reports.